GLOMA Snap shackles without ring

Snap shackles without ring

They are hybrids, the body is manufactured in AISI 316 and the pin in High Resistance for a better performance.

Manufactured with an exclusive design.

Ref. A m.m B m.m Work load kg. Break load kg.
1001 45 16 1070 1370
1002 60 22 1680 1880

All Gloma products are forged in cold and hot and mechanized. ⁣
They have always refused the Cast because of the problems of porosity, resistance, breaking and deformation it has. ⁣
All Gloma products we distribute are produced in our company in Spain with raw material coming from European producers. ⁣
Due to Gloma’s making policy we can certify the chemical composition of stainless steel Aisi-316, 17-4 Ph… ⁣
Gloma’s products are also tested by the APPLUS laboratories to guarantee the break loads and the work loads. ⁣
In their catalogue you can find the results of the tests that the laboratory gives them. ⁣
APPLUS is the official laboratory in Spain that guarantees all the results.⁣

1. Work Load. It is the most important issue. The work load shows the working limit of each piece / model. The result shows when the piece loses all the properties that it has.

2. Break Load. It is when the piece breaks after suffering a big deformation. However, there may be differences between one piece and another.

We recommend to our clients to apply a “safety factor” called “safe working load” depending on each application.

We recommend a safe Working Load of -25% on the final results indicated in the Catalogue.

Brand

Diameter

16 mm, 22 mm

Scroll to Top