GLOMA Snap hooks

Snap hooks

They are hybrids, the body is manufactured in AISI 316 and the pin in High Resistance for a better performance.

Manufactured with an exclusive design.

Ref. A m.m B m.m C m.m Work load kg. Break load kg. PCS in a Bag Bag Weight Kg.
1501 50 9 7 350 480 25 0,624
1502 70 12 10 610 850 25 1,786
1503 100 17 14 1830 2850 10 1,832


All Gloma products are forged in cold and hot and mechanized. ⁣
They have always refused the Cast because of the problems of porosity, resistance, breaking and deformation it has. ⁣
All Gloma products we distribute are produced in our company in Spain with raw material coming from European producers. ⁣
Due to Gloma’s making policy we can certify the chemical composition of stainless steel Aisi-316, 17-4 Ph… ⁣
Gloma’s products are also tested by the APPLUS laboratories to guarantee the break loads and the work loads. ⁣
In their catalogue you can find the results of the tests that the laboratory gives them. ⁣
APPLUS is the official laboratory in Spain that guarantees all the results.⁣

1. Work Load. It is the most important issue. The work load shows the working limit of each piece / model. The result shows when the piece loses all the properties that it has.

2. Break Load. It is when the piece breaks after suffering a big deformation. However, there may be differences between one piece and another.

We recommend to our clients to apply a “safety factor” called “safe working load” depending on each application.

We recommend a safe Working Load of -25% on the final results indicated in the Catalogue.

Weight 0.5 kg
Dimensions 20 × 5 × 15 cm


50 mm, 70 mm, 100 mm

Scroll to Top